How do I track packaging materials and BOMs with a contract manufacturer?
Use bills of materials to track bottles, labels, cartons and inserts sent to your contract manufacturer, so packaging stock never runs out unexpectedly.
Anadoris Digital · · 4 min read

Packaging is where many D2C brands lose money quietly. Labels are printed in large minimum quantities, cartons are ordered for a design that later changes, and caps run out the week before a production run. Because packaging often sits at the manufacturer’s site, nobody on the brand side has a clear count.
A bill of materials, or BOM, fixes this by stating exactly what goes into one finished unit. Once the BOM exists, the ERP can calculate what you need, what you have and what has been used.
What a D2C BOM looks like
For a brand using a contract manufacturer, the BOM usually covers the parts you buy and supply. The formulation itself may be the manufacturer’s responsibility and appear as one line, or not at all. A typical BOM for a single bottle of a personal care product might list the bulk product, bottle, pump or cap, front label, back label, outer carton, leaflet and shipper carton share.
- Use a separate item code for each component, including each label design.
- Record the quantity per finished unit, with allowance for expected wastage.
- Keep version history so that design changes do not overwrite old BOMs.
- Mark which components the brand supplies and which the manufacturer supplies.
Tracking packaging at the manufacturer
Create a location in the ERP for each manufacturer. When packaging is delivered directly from your printer to the manufacturer, receive it into that location. When you send packaging from your own warehouse, record a transfer to that location.
After each production run, the ERP consumes components according to the BOM and the quantity received. The remaining balance at the manufacturer is what should be on their shelves. Ask the manufacturer for a physical count at agreed intervals and compare.
Planning packaging purchases
Packaging often has longer lead times and larger minimum order quantities than the product itself. Use the BOM and your production plan to calculate how much of each component you need for the next few runs. Compare it with stock on hand at your warehouse and the manufacturer, and with open purchase orders.
This prevents the common situation where the product is ready but cannot be filled because a label or cap is missing.
Handling design changes
When a label or carton design changes, create a new component code and a new BOM version with an effective date. Decide whether to use up old stock first or write it off. The ERP should then stop suggesting purchases of the old design.
Packaging control checklist
- Every packaging component has its own item code and unit.
- Every finished SKU has an active BOM with version history.
- Each manufacturer is a stock location in the ERP.
- Deliveries to the manufacturer are received into their location.
- Consumption is posted on every finished goods receipt.
- Manufacturer stock is counted and reconciled after each run or monthly.
- Packaging requirements are calculated from the production plan.
Costing packaging correctly
Packaging is part of the cost of each unit, and it is easy to undercount. When the BOM links each component to its purchase price, the ERP can calculate the packaging cost per finished unit automatically. That figure feeds directly into landed cost and margin reports, so price decisions reflect what each unit really costs.
Watch for packaging bought in large minimum quantities. If you buy a year of labels at once to get a better rate, the cash leaves the business today even though the cost is spread over many runs. A packaging stock report with value shows how much cash is sitting in printed material.
Dealing with obsolete packaging
Old label designs, discontinued SKUs and regulatory changes leave packaging that can no longer be used. Review packaging stock with no movement over a set period and decide whether to use, sell, recycle or write it off. Recording the write-off in the ERP keeps your stock value honest and shows the true cost of design changes, which helps when planning the next refresh.
Some brands also keep a small reserve of critical components, such as a unique cap or a custom bottle, at their own warehouse rather than at the manufacturer. If a manufacturer relationship ends suddenly, packaging held at their site can be slow to recover. Recording exactly what is held where makes that conversation far easier.
Agree in writing with each manufacturer who is responsible for packaging they hold on your behalf, including damage, loss and how leftover stock is returned. A clear agreement makes the monthly reconciliation a routine check instead of a negotiation.
Where to start
- List every packaging component for your top SKUs and create item codes.
- Build BOMs for those SKUs with realistic wastage allowances.
- Ask each manufacturer for a count of your packaging they hold and load it.
- Post consumption on the next production run and reconcile.
- Extend to the remaining SKUs once the process works.
Anadoris Digital can help set up BOMs and manufacturer stock locations so that packaging shortages show up before a production run, not during it.
Related service: ERP Solutions · More on this topic: ERP Solutions articles
